船舶行業的廢氣處理設備中，沸石轉輪+RTO是一種常用的技術。這種技術主要用于處理低濃度、大風量的有機廢氣，適用于不含有硫、氮、氯、氟等鹵素的廢氣。這些廢氣在燃燒后不會產生新的副產物。如果廢氣中含有這些成分，則需要在預處理階段將其去除。此外，廢氣的沸點不應過高，例如大于300°C，因為這樣會導致吸附到沸石分子篩上的廢氣在熱空氣的吹掃下長時間脫附不出來。

　　Zeolite impeller+RTO is a commonly used technology in the exhaust gas treatment equipment of the shipbuilding industry. This technology is mainly used to treat organic waste gases with low concentration and high air volume, and is suitable for waste gases that do not contain halogens such as sulfur, nitrogen, chlorine, and fluorine. These exhaust gases will not produce new by-products after combustion. If these components are present in the exhaust gas, they need to be removed during the pretreatment stage. In addition, the boiling point of the exhaust gas should not be too high, such as greater than 300 ° C, as this will cause the exhaust gas adsorbed on the zeolite molecular sieve to be unable to desorb for a long time under the blowing of hot air.

　　沸石轉輪+RTO廢氣處理工藝主要由沸石轉輪濃縮系統（包括吸附區域、脫附區域、冷卻區域）、脫附系統、蓄熱式氧化系統（包括RTO爐體、陶瓷蓄熱體、燃燒系統等）以及PLC控制系統等部分組成。其工作原理是利用沸石轉輪的轉動，將吸附有大量VOCs的廢氣進入高溫脫附區，利用小風量的高溫氣體將沸石轉輪上吸附的VOCs分子脫附出來，形成高濃度廢氣。脫附后的高濃度廢氣進入后端的廢氣氧化焚燒系統進行熱氧化處理，凈化后的廢氣可達標排放。

　　The zeolite wheel+RTO waste gas treatment process mainly consists of a zeolite wheel concentration system (including adsorption zone, desorption zone, cooling zone), desorption system, thermal storage oxidation system (including RTO furnace body, ceramic thermal storage body, combustion system, etc.), and PLC control system. Its working principle is to use the rotation of the zeolite wheel to enter the high-temperature desorption zone with a large amount of VOCs adsorbed on the waste gas, and use a small amount of high-temperature gas to desorb the VOCs molecules adsorbed on the zeolite wheel, forming high concentration waste gas. The high concentration exhaust gas after desorption enters the exhaust gas oxidation incineration system at the back end for thermal oxidation treatment, and the purified exhaust gas can meet the emission standards.

　　此外，沸石轉輪+RTO技術在船舶行業中也有應用。例如，上海熱之緣環保提出的“氣改電”方案，即沸石轉輪電加熱RTO，在船舶修造業的VOCs治理中使用。這個方案創新地使用電能替代傳統燃氣為RTO處理設備供熱，提高了安全性和節能效果。通過采用變頻、熱回收等節能技術，這種方法比傳統燃氣供熱節約25%以上的能源費用，并降低溫室氣體排放。

　　In addition, zeolite wheel+RTO technology has also been applied in the shipbuilding industry. For example, the "gas to electricity" plan proposed by Shanghai Re Zhi Yuan Environmental Protection, namely zeolite rotary electric heating RTO, is used in VOCs treatment in the shipbuilding industry. This solution innovatively uses electricity instead of traditional gas to provide heating for RTO processing equipment, improving safety and energy efficiency. By adopting energy-saving technologies such as frequency conversion and heat recovery, this method saves more than 25% of energy costs compared to traditional gas heating and reduces greenhouse gas emissions.

　　綜上所述，沸石轉輪+RTO技術在船舶行業的廢氣處理中是一個高效且環保的選擇，能夠有效處理低濃度、大風量的有機廢氣，并實現節能減排的目標。

　　In summary, zeolite wheel+RTO technology is an efficient and environmentally friendly choice for waste gas treatment in the shipbuilding industry, which can effectively treat low concentration and high air volume organic waste gas and achieve energy-saving and emission reduction goals.

　　本文由  沸石轉輪+RTO 友情奉獻.更多有關的知識請點擊  http://m.azsolar.cc/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is contributed by the zeolite wheel and RTO friendship For more related knowledge, please click http://m.azsolar.cc/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned